Program Mahjong Machine Installation Tutorial

What is a program mahjong machine

Mahjong machine intelligent program operating system is a new cheating product for all automatic mahjong machine independent research and development, can be intelligent self-drawn, but also can play hand uniform, on the right to hu, zhuzhuang can take good CARDS, can help people play mahjong easy hu CARDS.

Program mahjong machine main needle function: no installation, the perfect mobile phone operating system, simple, simple, fast start and other advantages. As long as the software is installed in the phone, you can control the mahjong machine in real time in bluetooth mode, especially for the better effect of bluetooth mahjong machine; For general automatic mahjong machine needs to cooperate with a dedicated mobile phone to achieve the effect, in (remote mode) to open the system can be easily controlled. The system supports its own selection or programming methods and some related program Settings. The operating principle of the software is simple and easy to understand, and everyone can quickly learn to operate it.

Program mahjong machine working principle

Procedures mahjong mahjong tiles is a magnetic, mahjong tiles on a tilting disc with plate rotation, the CARDS rise to the heights of magnetic that the brand is from the top disc hoop to absorption, and with the ring plate rotation to a slot by the shifter lever away, no positive magnetic CARDS continues to turn on the disk, card after being folded double by the push rod according to the number allocated to all around. A small spring on the disc flips the CARDS, magnetically facing up and being caught by the hoop, making the front CARDS flip down, until finally all the CARDS are sent to the slot to be taken away. All around the card enough, by the person to control the button, the card under the plate will be folded on all sides of the card to send on the stage.

Program mahjong machine installation tutorial

Step 1: place the base of the mahjong machine on the flat ground;

Step 2: open the foam packing box of mahjong machine host, two people lift out the program mahjong machine host, lay it on the base;

Step 3: install the screws between the base and the host machine;

Step 4: open the shell packing box, take out the shell of the mahjong machine, installed in the four sides of the machine;

Step 5: find the program u disk, plug it into the usb port of the mahjong machine, turn off the power after 10 seconds;

Step 6: according to the design of the program to take the card test machine can be successful.

Installation steps of mahjong machine

▶Installation: first put the frame into an appropriate position, lift the host and aim the Angle of the notch on the host computer box at the corresponding notch position of the frame, put the power cord head on the frame into the center hole of the host computer box (please be careful not to hold down the power cord), and tighten 4 M6*16 connection screws on the screw hole.

▶Power cord connection: remove the side panel of the computer case, take out the power cord head and switch input cord head, and connect and plug them, cover the side panel input cord head, connect and plug them, and cover the side panel. Horizontal adjustment: adjust the four adjustable anchor screws of the machine foot to make the table level of the mahjong machine.

▶Install outer frame and press frame

▶Outer frame of wooden structure: the positioning pins at both ends are aligned with the positioning hole on the panel support frame, push in and press down gently, and then finish successively.

▶Outer frame of plastic structure: tighten screw on the outer frame of any side of the upper side, and then on the outer frame of the adjacent side. After the interface is well connected, press gently to make the interface match, tighten screw, and then finish in turn.

▶Pressure box: butt four borders in turn, pressure on the desktop.