How To Set A License Number Of Automatic Mahjong Machine

one. First, take the mahjong's border to press the frame, open the cover, find the game scheme digital gear table above the cover, and then adjust the game scheme on the gear table. There are five motors in the mahjong table to drive the turntable and chain (with a push rod on the chain) and automatically controlled by the single chip. In addition, there are also control circuits such as dice, transmission positioning, controlled by special chip, and the circuit of different brand manufacturers is slightly different;

two. If you don't spend it, don't why don't whisper, you can find a relatively stocked position according to the remaining number of the number, then his remaining brand should be 108, 108 corresponding gear are 19 files. Then we found 108 gear 1. 108 files 19 for the gear table. The gear position adjustment (original gear 05), adjust the ten bits to 1, and adjust to 7;

three. After the gear is adjusted, you need to restart or reset the mahjong machine;

Four. Finally, the Mahjong machine is restored.

Finally, with you, you will simply talk about the principle of mahjong machine operation. The web on the back of the mahjong is magnetic, while the front is not, the card is rotated on a slope disc, and the card has risen to the height, the backpack is absorbed above the disc. And the loop is transferred to a slot and pushed by the lever. The frontboard continues to rotate on the plate. The cards on the groove are stacked by the push rod to be distributed to four sides. There is a small spring on the disc to turn the card, which is in front of the card, and the back is in the back, until all the cards are sent to the tank. After the four sides of the lack of departments, the motor is operated, and the board under the card will send the plate to the table.