How To Deal With The Slow Playing Of Mahjong Machine

How Mahjong Machine Works

The veneer on the back of the mahjong tiles contains magnets and other things that can be attracted to the magnetic force. The front side does not. (The magnetic force is the size of the magnet that can attract the back of the mahjong tiles, and the front side of the mahjong tiles has a certain thickness. To weaken the power, the dealer pointed out that it is not enough to suck up mahjong; in fact, it relies on electromagnets, and ordinary mahjong cannot be used.) The cards rotate with the plate on an inclined disc, and the cards rise to a high place. When the card with the back facing up is attracted by the magnetic ring on the shuffling barrel, it rotates with the magnetic ring and is sent to the conveying trough, and is pushed by the stacking motor at the head of the machine into a pile, pushed away by the chain rod, and the front facing up The cards continue to rotate on the plate, and the cards on the slot are folded into pairs and then distributed by the putter to the four sides. There is a small spring on the disc to flip the cards, so that the front cards are turned down, and the back is up and attracted by the magnetic coil, until all the cards are sent to the slot and taken away. When there are enough cards on the four sides, the lifting button on the operation panel is operated by a person, and the pallet under the cards sends the four-sided stacked cards out of the table.

There are two buttons in the middle of the desktop, which have three functions respectively; 1 there are two opening and closing buttons; 2 there are 4 shaking plug buttons, respectively in four directions. When the open button is pressed, the hatch will automatically open. At this time, you can push another mahjong tile on the table into it, and then press the button again, the hatch will automatically close, and there will be The motor drives the turntable and the chain (the chain has a push rod) to rotate, and is automatically controlled by the electronic chip. At the same time, the pre-shuffled cards will automatically rise, and the cycle repeats.

How to deal with the slow playing of mahjong machine:

1. The dial of the card plate falls off: just reinstall the drawing bar.

2. The position of the inclined axis is too high: press down the position of the inclined axis seat.

3. The magnetic circle cannot hold the mahjong tiles: adjust the position of the magnetic circle.

Fourth, the conveyor is weak: I can only wait for it to shuffle slowly.

5. The position of the shuffle bucket is not good: replace the mahjong tiles.

Sixth, the big spring is broken: just replace the spring.

7. The voltage is too low: you need to stop using electrical appliances that consume too much electricity.